XTOOL X100 PAD Elite Professional Tablet Key Programmer 3in1 Key Programmer+Car Scanner/ODO Meter Correction

2 Years Update

X100 PAD Elite Tablet Key Programmer

X100 PAD Elite is a professional tablet key programmer which not only provides customers with key programming but also supplies advanced special functions. Equipped with a KC100 key programmer, the X100 PAD Elite can perform: Key programming, oil service light reset, timing belt service light reset, tire pressure warning light reset, EPB reset, throttle body reset, DPF reset, battery reset, steering angle calibration, and OBD-II engine diagnosis, etc. Xtool X100 PAD Elite is the perfect solution for workshops and technicians who demand professional car diagnosis.

PLEASE NOTE: Different vehicles have different menus and systems. The common main function menu includes the following options:

Read ECU: This function is to read the ECU version information, which is the equivalent of “System Identification” or “System Information” in some electronic control systems. This will allow you to read ECU-related software and hardware versions, models, and production dates of diesel engines, part numbers, etc.

Read DTCs: Select Read Fault Codes to read the trouble codes stored in the ECU. The screen will show the trouble codes and their definition, shown below:

Tip: In the process of diagnosis, if the device shows “ System is OK” or “ No Trouble Code” it indicates that the ECU has not detected a fault in any of the circuits that it monitors. If there is a fault that is not being recorded it may be that the fault is with a part of the system not under the control of ECU, such as a mechanical system fault. It is also possible that the signal of a system sensor may be incorrect but still, within the ECUs stored limits, this can be verified in Live Data.

Clear DTCs: clear current and historical trouble codes memory in ECU. The trouble codes can not be erased without eliminating the fault that the code relates to. Return to the previous step, and select Clear Fault Codes to clear the current and historical trouble codes memory in ECU. Performing this function will clear all the current and historical trouble codes. Please ensure that the trouble codes have been recorded before clearing, as shown below:

TIP: Save or print the currently stored fault codes before clearing them to provide help in the case of an intermittent fault.

How to Use KC100:

KC100 works with VW/Audi/Skoda/Seat 4th and 5th immobilizer software and BMW CAS1-5 FEM IMMO immobilizer software. Let&rsquo’s take VW as an example. Since VW 4th and 5th Immo programming needs online programming, please make sure X100PAD Elite connects to the Internet before doing programming.

Steps as below:

1. Please use the main cable and OBDII connector (or another relative connector) to connect between the X100PAD Elite and your car’s OBD port.
2. Please use a USB to mini USB cable to connect between X100PAD Elite and KC100.

Pin Definition (Reference material) Various pin definitions are as follows:
1.  Manufacturer definition
2.  SAE J1850 bus positive
3.  Manufacturer definition
4.  Bodywork site
5.  Signal site
6.  ISO 15765-4 defined CAN high
7.  ISO9141 and ISO14230 defined Kline
8.  Manufacturer definition
9.  Manufacturer definition
10.  SAE J1850 bus negative
11.  Manufacturer definition
12.  Manufacturer definition
13.  ISO 15765-4 defined    CAN low
14.  ISO9141 and ISO14230 defined L line
15.  Permanent positive voltage

• 1, 3, 8, 9, 11, 12, and 13 are defined by the manufacturer.
• 2, 6, 7, 10, 14, and 15 are used for diagnostic communication. Unused definitions can be defined by manufacturers.

X100PAD Elite Technical Parameters:

Oil Reset Functions Feature:

Innovative one-click Oil Reset for for VW, for Audi, for BMW, for Mercedes for Seat, for Skoda, for Volvo, etc.
Support engine oil, spark plugs, front brake pads, back brake pads, air conditioner, brake liquid, coolant liquid, vehicle checking , etc. resetting for BMW. And the supported for BMW models are F01 / F02 / F03 / F04 / F07 / F10 / F11 / F12 / F13 / F18 / F20 / F30 , etc.
Support for Mercedes for Benz new C Class, E Class models and for Mercedes Benz VITO/for VIANO/for SPINTER.
Support the lifespan percentage resetting of engine oil for Buick, for Cadillac etc.
Support for Porsche Cayenne, for Panamera till 2012
Support for maintenance light reset for Volvo, for Land Rover.

Oil Service Light Reset Coverage:

America: for Buick, for Cadillac ,for Chevrolet, for Chrysler, for Chevrolet/for G MC, for Ford/for Mercury/for Lincoln, for Oldsmobile, for Pontiac, for Saturn, for GM, for Jeep and more…
European: for VW, for Audi, for Porsche, for BMW, for Mercedes-Benz, for Volvo ,for Land Rover, for Peugeot, for Citroen, for SAAB, for Seat, for Skoda and more…
Asia: for Toyota/for Lexus, for Nissan/for Infiniti, for Honda, for Acura, for Isuzu, for Chery, for Ford Transit, for Rowe, for MG and more…

EPB Electrical Parking Brake Adaptation:

for VW ( R36, CC, Magana etc.), for Audi ( A4L, A6L, Q5 etc.), for Seat, for Skoda and more…
Tire Pressure Warning Light Reset (Manual Operation):
for Mercedes-Benz, for GM, for VW, for BMW, for Toyota and more…
Timing Belt Light Reset (Manual Operation)

Accessories

• Certificate of quality
• Packing List
• User Manual
• Tool Case
• Carton

Main Units

• Mini B to USB 3.0 Type C Cable
• X100 PAD Elite Cable
• KC100
• EEPROM 2 Adapter
• Charger For tablet
• Charger US Adapter

Test Connectors

• OBDII-16
• HONDA-3
• MAZADA-17R
• KIA20
• HYUNDAI/KIA-10
• DB15 Main Cable
• USB3.0 Main Cable (1m)

conatct us for more info..