Top 8 Reasons to Get VVDI Prog:
1. Support R&W lots of chips, include MC9S08 series, MC68HC(9)12 series, MC9S12 series, V850 series, H8X series, R8C series, PCF79XX series, and most EEPROM chips
2. Support chip data verify, check blank function
3. Support data file compare function
4. Support R&W BMW N20, N55 ECU ( show ISN directly )
5. Stable R&W MC9S12XE series chips (5M48H/1N35H/2M53J/3M25J etc.)
6. Support renew PCF79XX remote, currently support BMW E/F series
7. Lots of connection diagram
8. Support Multi-language now: English, Arabic, Czech, French, Italian, Polish, Portuguese, Russian, Spanish, Turkish & Chinese Simplified
Buy VVDI-Prog programmer, get free BMW ISN read function and NEC, MPC, Infineon, etc chip continuously update service.
VVDI Prog Latest Update Information:
VVDI Prog V4.9.5 (2020-08-24)
* This version DON’t need updated firmware
* Fix RH86 bug
* Fix RH850 Series bugs
+ Add VVDI PROG USER MUNUAL 4.9.5
version in Doc folder
+ Add 24AA025,
24AA1025,
24AA1026 options
in<1-EEPROM&FLASH->
+ Add FOTON(MC9S12G128) option in
<4-IMMOBILIZER->
+ Add HC05X32(1D69J) option in
<4-IMMOBILIZER->
+ Add 300C-46 option in
<4-IMMOBILIZER->
+ Add S350-CONTROL-UNIT-PKE option in
<4-IMMOBILIZER->
+ Add MAXUS-V80 option in
<5-DASHBOARD->
+ Add CAPTU-AIRBAG option in
<7-AIRBAG->
+ Add VOLVO-AIRBAG(2020) option in
<7-AIRBAG->
+ Add C205-CHAIR-MODULE
option in <8-OTHERS->
+ Add FAW-BCM(MPC5603BxLQ)
option in <8-OTHERS->
+ Add BOYUE-PRO(2020)-PEPS-CONTROLLER
option in <8-OTHERS->
+ Add BOYUE-TIRE-PRESSURE-MODULE
option in <8-OTHERS->
+ Add VV5-TAILGATE(2017)
option in <8-OTHERS->
+ Add RFA-SECURED(SPC560B60L3)
option in <8-OTHERS->
+ Add MAGOTAN-LEFT-FRONT-DOOR-MODULE
option in <8-OTHERS->
+ Add MAGOTAN-REVERSING-RADER-MODULE
option in <8-OTHERS->
VVDI PROG Latest Software Version V5.0.1 Update (2021-09-26)
* This version DON’t need update
firmware
+ Add VVDI PROG USER MUNUAL 4.9.4
version in Doc folder
+ Add R7F701330 option in
<2-MCU->
+ Add FENGJUN-7 option in
<5-DASHBOARD->
+ Add TOYOTA-RAV4 option in
<5-DASHBOARD->
+ Add BAOJUN-310/560 AIRBAG
option in <7-AIRBAG->
+ Add T300 AIRBAG option in
<7-AIRBAG->
+ Add NEW VISION AIRBAG option in
<7-AIRBAG->
+ Add BAODIAN AIRBAG option in
<7-AIRBAG->
+ Add LYNKCO-AIRBAG option in
<7-AIRBAG->
+ Add SRS-VW62 option in
<7-AIRBAG->
+ Add AUDI-AC-CONTROLLER(R7F701548)
option in <8-OTHERS->
+ Add FRM-E-SERIES-XDT256
option in <8-OTHERS->
+ Add ESCORT-BCM option in
<8-OTHERS->
+ Add 8th-SONATA-AC-CONTROLLER
option in <8-OTHERS->
+ Add SKODA-RADIO-STREAM
option in <8-OTHERS->
VVDI PROG Latest Software Version V4.9.3 Update
v4.9.3 (2020-04-29)
* This version DON’t need an update
firmware
* Fix 93Cxx ERASE BUGs
+ Add VVDI PROG USER MUNUAL 4.9.3
version in Doc folder
+ Add S2943 option
in<1-EEPROM&FLASH->
+ Add S2943(CLIP) option
in<1-EEPROM&FLASH->
+ Add EIZ-W906-9S12XDT384,
EIZ-W906-9S12XDP384(ADAPTER),
EIZ-W906-9S12XDP512,
EIZ-W906-9S12XDP512(ADAPTER)
option in <4-IMMOBILIZER->
+ Add CRAFTER-EZS-9S12XDT384,
CRAFTER-EZS-9S12XDT384(ADAPTER),
CRAFTER-EZS-9S12XDP512,
CRAFTER-EZS-9S12XDP512(ADAPTER)
option in <4-IMMOBILIZER->
+ Add ARRIZO3 option in
<5-DASHBOARD->
+ Add FIAT500 option in
<7-AIRBAG->
+ Add GLC260-ELECTRONIC-TAILGATE-UINT(2016),
V260-STEERING-COLUMN(2016) options in
<8-OTHERS->
+ Add BESTURN B90 CONTROL UNIT-PKE(2015)
option in <8-OTHERS->
+ Add CLIO-HFM-MODULE option in
<8-OTHERS->
+ Add PHAETON-REVERSE-RADAR-UINT(2012)
option in <8-OTHERS->
VVDI PROG latest software version V4.9.2 update (2020-03-16)
* This version DON’t need update firmware
+ Add VVDI PROG USER MUNUAL 4.9.2 version in Doc folder
+ Add STM32F405RG,
STM32F405OG,
STM32F405VG,
STM32F405ZG,
STM32F405OE,
STM32F407VE,
STM32F407ZE,
STM32F407IE,
STM32F407IG options in <2-MCU>->
+ Add FRM-E-SERIES-XEQ384-READ,
FRM-E-SERIES-XEQ384-WRITE,
FRM-F-SERIES-XEP100-READ,
FRM-F-SERIES-XEP100-WRITE,
FRM-F-SERIES-XET512-READ,
FRM-F-SERIES-XET512-WRITE options in <8-OTHERS->
+ Add ENVISION—TAILGATE-COMPUTER options in<8-OTHERS->
+ Add PHAETON—TAILGATE-COMPUTER(2012) options in<8-OTHERS->
VVDI PROG latest software version V4.9.1 update
v4.9.1(2020-02-19)
* This version DON’t need update firmware
+ Add VVDI PROG USER MUNUAL 4.9.1version in Doc folder
+ Add ME17.3.0(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.1.10(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP54(ADAPTER) options in<10-BOSH-ECU-ADAPTER>->
+ Add EDC17C69(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.3.3(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.8.31(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.7.5(ADAPTER) options in<10-BOSH-ECU-ADAPTER>->
+ Add MED17.7.7(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.7.5(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.8.3.3(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP49(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C76(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.1.12(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C79(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP52(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME1717.9.20(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C70(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP42(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C58(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.9.21(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C83(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.9.9(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.8.32(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C79(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.9.21(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.8.32(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C79(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.3.4(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.8.3.3(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.1.27(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.5.24(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.5.26(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
VVDI PROG Latest Software Version V4.9.0 Update
(2020-01-15)
* This version DON’t need update firmware
+ Add VVDI PROG USER MUNUAL 4.9.0 version in Doc folder
+ Add R5F100_Data_8KB_Read_SECURED options in
<2-MCU>->
+ Add R5F10C/D_Data_8KB_Read_SECUREDoptions in
<2-MCU>->
+ Add R5F104_Data_8KB_Read_SECURED options in
<2-MCU>->
+ Add AXELA options in<4-IMMOBILIZER>->
+ Add LINGZHI-V5(2016) options in<5-DASHBOARD>->
+ Add TRUMPCHI-GS8(2017) options in<5-DASHBOARD>->
+ Add TIGUAN-L options in<7-AIRBAG>->
+ Add G63-FAS(2019) options in<8-OTHER>->
+ Add G63-FAS-SWITCH(2019) options in<8-OTHER>->
+ Add MED17.7.1(ADAPTER) options in<10-BOSH-ECU-ADAPTER>->
+ Add MED17.7.3(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C66(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C10(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.0.7(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP47(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP62(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C57(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C58(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.9.3(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP55(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.9(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C60(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP42(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.4.4(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.9.63(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C64(ADAPTER) options in<10-BOSH-ECU-ADAPTER>->
How To Update VVDI Prog Programmer Online?
This function requires internet support
Click the “Upgrade” button enter the upgrade interface, show as the following picture
Enter update interface, if software show ”communication with the server failed”, please close your Anti-virus and computer firewall and retry. If software show “unable to find equipment”, please reconnect the device
Tip information shows the latest software version and upgrades information
Device information shows the device SN, device firmware version, and the latest firmware version
Firmware upgrade steps:
1. Select the firmware version
2. Click the “Start Firmware Upgrade” button
3. Don’t close or pull out USB cable before upgrade finished
Software upgrade steps:
1. Click the “Software Link 1″ or “Software Link 2” button, download software from the web
2. Extract the file
VVDI Prog Programmer Supported Type List:
ATMEL, CATALYST, EXEL, FAIRCHILD, INTEL, MICROCHIP, MITSUBISHI, ST, TOSHIBA, XICORMCU:
RENESAS V850, RENESAS H8X, RENESAS R8C, MOTOROLA MC68HC(9)08, MOTOROLA MC68HC(9)12
MOTOROLA MC9S08, MOTOROLA MC9S12, NXP PCF79XX, ST ST10F, INFINEON XC2XXX, ATMEL, ATMEGA XXXX,
INFINEON XC164CS, MICROCHIP PIC18F
BMW E Series, BMW F Series, BOMBARDIER, CHANGAN, DELPHI, MAGNETI, MARELLI, RENAULT, OTHERIMMOBILIZER List：
AUDI, BENZ, BMW, BUICK, CHEVROLET, STEC, CHRYSLER, FIAT, FORD, GREAT WALL, INFINITI, LANDROVER,
JAGUAR, NISSAN, OPEL, PORSCHE, RENAULT, SAIC MOTOR, VOLKSWAGEN, ZHONGHUA.DASHBOARD List:
BUICK, CHANGAN, CHERY, CHEVROLET, DONGFENG, FAW, FORD, GEELY, GREAT WALL, HAFEI, TOYOTA,
HANDING, HAIMA, HONDA, JAC, JAGUAR, JINBEI, JMC, LUXGEN, NISSAN, SGMW, VOLVO, ZHONGHUA, ZOTYEREMOTE List:
BMW E Series, BMW F Series
VVDI PROG Connection for Maybach:
VVDI Prog Connection for Sprinter:
1.16 Pin DIP socket Function:
Read EEPROM chips Use method: Follow the image direction when inserting the DIP chip (PIN1 as yellow point show as the picture);
SOP chip need soldering on 16Pin adaptor first, then insert the chip follow the image direction
2. MCU Reflash Cable
Function: Read & Write MC68HC(9)12, V850, H8X, R5C series chips,current version is V2
Use method: Soldering the line on the pin of the chip before reading & writing
Notes:
(1) Please check all connection lines, ensure a correct and reliable connection
(2) Please Don’t lengthen CLK and GND-C line, maybe cause read data failed.
3. ECU Reflash Cable
Function: Read & Write engine ECU
Use method: Connect the ECU and R&W
Notes: Please check all connection lines, ensure a correct and reliable connection
4.MC9S12 Reflash Cable
Function: Read & Write MC9S08, MC9S12 series chips, the current version is V1
Use method: Soldering the line on the pin of the chip before reading & writing
Notes:
(1) Please check all connection lines, ensure a correct and reliable connection.
(2) Please Don’t lengthen CLK and GND-C line, maybe cause read data failed.
It seems that VVDI prog reading speed is dependent on the processor speed of the computer.
CAS3 0L15Y flash read times
Centrino processor @ 1.6ghz Windows XP = 12mins
Core2 Duo processors @ 2.5ghz Windows 7 32 bit = 5 mins
i7 @ 4.4ghz Windows 7 64 bit = 2mins 30 seconds.
Other programmers do not seem to be affected by processor speed at all.
I also would have thought this was a fairly easy question to answer without me doing all the testing
Tested by me: CAS 2, CAS 3, CAS 3+, Cas4 5m48h, VOLVO cem v40 all ok.
Is a very good tool and for BMW cas4.
I tested today D80 and an m35080v6, and they work perfectly.
Mine erased D160 (BMW F01 dash) with no problem.
Tried to renew the BMW e series 868 key. Vvdi programmer claimed operation success but in tango, the key is now recognized as transponder type A. locked
I did renew 2 keys! Both worked and now are programmed to cars!
The only thing you need to disconnect from PCB is the battery while writing the renew file. (Remove the batteries)
Renew BMW series E 868 key – 100% OK z VVDI-prog v4.5.7
FRM3 works perfectly
More EDC17 under the ECU section would be great!
Especially BMW EDC16 and EDC17 for ISN purposes.
BMW F series FEM module reading but for that, I can only dream about…
BMW BMSX bike ECU would be great…
Renew pcf7946 and 29f family
Renew E series remote with pcf7942 / pcf7944 would be fine
Unlock and download the 9S12G128 secure without erasing it first would be nice.
erasing all 35080s and d80 with a sonic clip would be super nice too!
I read the CAS3+ MCU with VVDI Prog and that worked perfectly.
BMW FRM3 series Exx – READ and WRITE – OK
BMW KEY series Exx – OK
BMW DashBoard 6WB 160DQWT – READ, ERASE, WRITE – OK
2004 Suzuki Jimny:
The first job I did with this kit was actually a 2004 Suzuki Jimny, literally within around 30 – 45 minutes of the parcel being delivered. The software was quick and easy to install (No cd provided, need to download from dealer website and update to latest version).
Anyway, for the Suzuki, I used the VVDI-prog with the EEPROM clip adapter to read the immo box 24c01 in-circuit. Then using the VVDI2 immobilizer data tool, I was able to create a dealer key with an Xhorse 4d/4c chip. Write the new dump back to the immo box with VVDI-prog, put it all back together, and worked the first time thankfully after previous failed attempts with other devices.
Anyway end goal complete and happy with the new purchase
BMW EWS3:
I did some testing on the bench with a BMW EWS3 using VVDI2 with the CAS adapter cable (Which needs an external 12Vdc supply). It reads the EWS ok, but can’t write a file back to EWS.
I will try reading the EWS3+ that is in my car and produce a dealer key for it.
The file change km’ seems to read from dump ok, and will allow you to modify the file with new km (untested on the car though). If I get some time, later on, will try to read/write with VVDIprog.
VVDI Prog FAQs:
A 1: If the battery was removed, security data is gone. You need to send it in for repair. There is nothing you can do on your own.
VVDI Prog Programmer Package List:
2. EEPROM Socket
3. EEPROM Adapter
4. MC9S12 Reflash Cable V1
5. MCU Reflash Cable
6. ECU Reflash Cable
7. USB B-Type Cable
8. TB28FXXX Adapter (Optional)
9. PCF79XX Adapter (Optional)
10. New M35080/D80 Adapter (Optional)
11. New EWS3 Adapter (Optional)
12. New EEPROM CLIP Adapter (Optional)
13. New EWS4 Adapter (Optional)
Be the first to review “Original Xhorse VVDI PROG Programmer”
Related products
KEY PROGRAMMER
ODO+airbag programmer
ODO+airbag programmer
KEY PROGRAMMER
KEY PROGRAMMER
Reviews
There are no reviews yet.